Loading...
Serving Del Rio, TX and surrounding areas. (830) 488-9351
Fast vehicles on your driveway or parking lot put people and pavement at risk. We install asphalt speed bumps built to handle South Texas heat - no signs, no enforcement, just a permanent fix.
Fast vehicles on your driveway or parking lot put people and pavement at risk. We install asphalt speed bumps built to handle South Texas heat - no signs, no enforcement, just a permanent fix.
Speed bump installation in Del Rio involves building a raised asphalt section across your driveway or parking area using hot-mix asphalt compacted in layers, shaped to the correct height and slope - most single-bump jobs on a private lot are completed in one day.
Speed bumps on private driveways, parking lots, and HOA roads in Del Rio are a simple, permanent traffic-calming solution. Unlike a sign that gets ignored, a physical bump forces every driver to slow down before they reach the property. For longer driveways - common on larger ranch-style lots in the Val Verde area - vehicles can pick up real speed before reaching the house or garage, making a bump a practical safety measure rather than an overreaction. If your parking lot surface needs attention before the bump goes in, our parking lot paving team can prepare the base and surface first.
After installation, the bump is finished with painted stripes or reflective tape so it is clearly visible at night. Protecting the bump with periodic asphalt sealcoating on the same schedule as the rest of your driveway keeps the material in good shape through Del Rio's demanding summer heat.
If cars regularly speed through your driveway, parking area, or private road, a speed bump is the most direct fix. Longer driveways on Del Rio properties with larger lots often give drivers room to accelerate well before reaching the house or garage.
If kids or animals spend time near where vehicles travel, slowing traffic down gives everyone more reaction time. A speed bump creates a physical reminder that drivers cannot ignore - no matter how familiar they are with the property.
Landlords and property managers often add speed bumps when tenants or visitors treat a parking lot like a through-street. It is a low-cost, permanent solution that does not require ongoing enforcement from property management.
Heavy or fast vehicles braking or turning sharply near the same spots wear out asphalt faster. A well-placed speed bump reduces that stress and extends the life of your surface - a real benefit given how much Del Rio's summer heat already stresses pavement.
We install asphalt speed bumps on residential driveways, commercial and HOA parking lots, private roads, and shared community surfaces. Every job starts with measuring the location and checking the existing base - a stable base is what keeps a bump from cracking or shifting over time in Del Rio's clay and caliche soils. When the surrounding pavement needs work before the bump goes in, we address that first so the finished result holds up. If a full lot refresh is needed, our parking lot paving service handles the entire surface.
We also handle the markings - yellow or white painted stripes across the bump are standard practice and make the feature easy to see at night or in low light. For properties that need broader surface protection after the bump is installed, asphalt sealcoating applied over the bump and the surrounding driveway keeps the material sealed against Del Rio's UV exposure and summer heat.
Best for single-family homes and rental properties where vehicles accelerate on a longer private drive before reaching the structure.
Suited for commercial and multi-family properties where tenants, customers, or visitors treat the lot as a through-route.
Ideal for neighborhood associations and gated communities that want traffic calming on private interior roads without ongoing enforcement.
For longer private roads or large parking areas where a single bump is not enough to maintain safe speeds across the full length of the surface.
Del Rio sits in the Chihuahuan Desert borderlands and regularly sees summer temperatures well above 100 degrees. That heat is the dominant condition that shapes asphalt work here - not the freeze-thaw cycles that affect northern Texas cities. A speed bump installed with the wrong mix will soften and deform by midsummer. We use hot-mix asphalt formulated for South Texas heat conditions, compacted to the density that holds a firm profile through triple-digit summers and the dramatic temperature swings between summer days and winter nights. The clay and caliche soils common across Val Verde County also matter - we assess the base before every installation because a bump on an unstable base will crack or sink within a season.
We install speed bumps throughout Del Rio and the surrounding region, including Brackettville and Val Verde Park. Properties near the Laughlin Air Force Base side of town and older neighborhoods closer to downtown have different lot layouts and pavement ages - we tailor the installation to what is actually on the ground. For properties where drainage is also a concern, we can address both in one visit.
We reply within one business day. Let us know the location, roughly how wide the driveway or lot is, and how many bumps you are considering. We may ask for a photo of the area before scheduling.
We visit the property to measure the location, check the condition of the existing pavement and base, and confirm the best height and profile for your situation. You receive a written estimate before any work is scheduled.
The crew prepares the area, addresses any cracks or soft spots at the bump location, then builds the bump in layers using hot-mix asphalt - compacted and shaped to the correct profile. The work area is cleared of vehicles before any material is placed.
Once the asphalt has cooled enough to drive on - typically within a few hours in Del Rio's warm climate - paint or reflective tape markings are applied. We walk through the finished work with you and confirm the cure time before full traffic resumes.
We visit the property, take measurements, and give you a written quote - no obligation. We serve all of Del Rio and Val Verde County.
(830) 488-9351We use hot-mix asphalt formulated for the high-heat conditions in the Del Rio area. A bump built with the right mix stays firm in July and holds its shape through the temperature swings between summer and winter - something generic residential mixes often fail to do.
A speed bump on a weak base will crack or sink within a season. We check the existing base at the installation location before placing any material. If it needs prep, we handle that first. The National Asphalt Pavement Association identifies proper base preparation as the single most important factor in long-term pavement performance.
Del Rio gets intense short-duration rainstorms, and a speed bump that traps water creates a new problem. We profile every bump with edge slopes or gaps so water flows around it - not behind it.
Our paving work is licensed through the state of Texas. You can confirm contractor license status at any time through TDLR. That license is your protection if something does not go as planned.
A speed bump is a small investment compared to the cost of repairing pavement that has been worn down by hard braking, or the liability that comes with an unsafe lot. We build ours to last through Del Rio's demanding conditions so you are not redoing the work in a year.
Seal your driveway or parking lot against Del Rio's UV exposure and summer heat - extends the life of the bump and the surrounding surface.
Learn MoreFull-depth parking lot paving for commercial and multi-family properties that need a fresh surface before speed bumps go in.
Learn MoreSpeed bump installation is fast and permanent - call us today and we will get you on the schedule before the summer heat makes paving work more demanding.